Kreg Micro Drill Bit KJD/MICROBIT

This unique bit works with the Micro-Pocket Drill Guide to create a 25% smaller pocket hole (1⁵/_{16 inch} long). Micro-Pocket holes work great in virtually every application where you'd use standard pocket holes, and are especially good for ¹/_{2 inch} (12mm) thick material and narrow stock, down to 1in (25mm) wide. Because the bit removes less material, drill strokes are faster and easier.

For Use With:
Compatible with the Kreg Jig  K3, K4, K4MS, and K5, when being used with the Micro-Pocket Drill Guide. Also compatible with the Foreman Pocket-Hole Machine (Item# DB210).
 

• Works with the Micro-Pocket Drill Guide to create a 25% smaller pocket hole
• For use with the Kreg Jig  K3, K4, K4MS, and the Foreman Pocket-Hole Machine (Item# DB210)
• Works great in almost every application where you'd use standard Kreg  pocket holes
• Especially good for ¹/_{2 inch} (12mm) thick material and narrow stock, down to 1 inch (25mm) wide
• Faster, easier drill strokes because the bit removes less material
• ¹⁹/_{64 inch} (7mm) diameter, 0.170 inch (4mm) diameter pilot tip
• One-piece, industrial high-speed steel