Tormek
The sharpening angle can be set from 10 to 75 degrees with the WM-200 AngleMaster. The AngleMaster is designed to work on all grinding wheels with a diameter from 150 mm (5 7/8 inch) to 250 mm (9 7/8 inch). So you get an accurate setting even if you have a grindstone that's been worn down a lot.
The WM-200 AngleMaster has two magnets so you can easily place it on the machine so that it's always close to hand. This applies to all Tormek models except for the 1200 and T-3. On the Tormek T-4, you can place the AngleMaster on the machine plate, which is made of metal; and on the Tormek T-8 you can place it on the plate mount included.
Key Features
- Measures the existing bevel angle of the tool.
- Set the jig to the desired sharpening angle before sharpening.
- Easy to use.
- Works on grinding wheels from 150 mm (5.7/8 inch) to 250 mm (9.7/8 inch) in diameter.
- Works with the Tormek T-8, Tormek T-4 and older models.
Instruction document for WM-200 can be found Here
Shipping & Returns
Shipping & Returns
![Tormek WM-200 Pro-AngleMaster which incorporates edge guide notches from 15 to 75 degrees around three sides. Two thumb wheel tightening guides one to adjsut for wheel grindstone wheel diameter and the other to set the angle of sharpening from 5 to 75 degrees.](http://thetoolboxscotland.co.uk/cdn/shop/products/TormekWM-200AngleMaster.jpg?v=1672697806&width=1445)
![Tormek WM-200 used to set the angle on a wood chisel. Indicates a stone diameter of 250mm and an angle 25 degrees.](http://thetoolboxscotland.co.uk/cdn/shop/products/TormekWM-200_AngleMaster.jpg?v=1672697987&width=1445)
![Anglemaster WM-200 used in setting the angle on a knife using a T4.](http://thetoolboxscotland.co.uk/cdn/shop/products/Tormek_WM-200AngleMaster.jpg?v=1672698003&width=1445)